DO-160 | Induced Signal Susceptibility

RTCA DO-160 – Section 19.0 – Induced Signal Susceptibility

 

This test determines whether the equipment interconnect circuit configuration will accept a level of induced voltages caused by the installation environment.
This section relates specifically to interfering signals related to the power frequency and its harmonics, audio frequency signals, and electrical transients that are generated by other on-board equipment or systems and coupled to sensitive circuits within the EUT through its interconnecting wiring.
Power leads tested under Section 18 are exempt from this test.

 

DO-160 is a standard for environmental test on avionics equipment published by RTCA, the Radio Technical Commission for Aeronautics. The DO 160 G was amended and now all guideline inside it are replaced by the DO 357.
On our website you can find only some abstracts of the document, for the full text of the guideline you have to purchased it from RTCA.
We remember you that now DO 160 G cannot be read without DO 357.
If you need any interpretation regarding the text of such standard, please contact CELAB.
CELAB is the only Italian (and one of the few European) member of the RTCA Special Committee 135, the commettee for devolpment of DO 160 G.

 

    Contattaci per un preventivo gratuito!

    * dato richiesto

    Nome *


    Azienda *


    Settore in cui operi *


    Email *


    Recapito Telefonico


    Servizio che ti interessa


    Messaggio




    captcha